Stretched Sample Cutter for Dispersion Testing
The DisperCut 3000 is a small and easy to use tabletop sample cutter that produces fine cuts of cured and uncured rubber samples for Dispersion testing.
Test samples can be cut and prepared within a single second! This makes the patented DisperCut 3000 sample cutter the most reliable tool for producing repeatable samples for Dispersion testing by excluding all kinds of operator influences.
The cutter is equipped with a high-speed close and cut system with simultaneous sample pre-stretching to avoid smearing and guarantee the best straight and clean cutting results. Integrated endstops make sample positioning fast, reliable and easy, ensuring similar test sample dimensions. The precision-ground blade guides, combined with ultra sharp, heavy duty single edge blades, ensure straight and precise cuts.
The cutter is equipped with a two-hand safety control system for simple operation and the highest possible operator safety, eliminating the risks associated with manually operated sample cutters. The cutting knife is always covered and protected to avoid any accidental cutting or touching of the blade.
In combination with the DisperCool 3000 chiller unit, the DisperCut 3000 be used for preparing uncured rubber samples by first cooling them down to glass transition temperature in the DisperCool 3000 and then cutting the samples with the DisperCut 3000.
MonTech DisperCut 3000
||ISO 11345, ASTM D-7723|
||Ultra-sharp heavy duty single edge blades, easily replaceable|
||Max. Ø 45 mm (1.75 in) or 40 x 40 mm (1.5 in)|
||adjustable by different cutting plates from 5 to 10%|
||2-hand safety control with anti-tiedown|
||Up to 20 cuts per minute|
||Height: 430 mm (17 in)|
Width: 295 mm (11.6 in)
Depth: 205 mm (8 in)
||12.0 kg (26.5 Lb)|
||min. 5 Bar (72 PSI)|